Cart

Your cart is empty

Matte black 4 Lite steel French door with clear glass as a kitchen pantry door, North Carolina

Pantry Door in North Carolina: 4 Lite Steel French Door

ProjectInterior Door to Pantry

LocationNorth Carolina, USA

Door4 Lite Interior Steel French Door – Matte Black, Clear Glass, No Lock (Magnetic Closure)

Project overview

This project features a clean, modern pantry upgrade using our 4 Lite Interior Steel French Door. The matte black frame contrasts beautifully with the light tile and wood tones, creating a subtle yet striking focal point in the kitchen.

The clear tempered glass keeps the space visually open, allowing natural light to flow through while maintaining easy access to the pantry. The slim magnetic latch ensures smooth, quiet closing—ideal for high-traffic kitchen areas. This installation shows how a steel and glass door can elevate even compact spaces with a refined architectural touch.

4 Lite steel French pantry door, matte black frame against light tile and wood tones — view 1

4 Lite steel French pantry door, clear tempered glass, kitchen view — view 2

4 Lite steel French pantry door, slim magnetic latch detail — view 3

Reasonably priced for great quality. Very responsive to questions after the door was picked up and during the installation process.

— Mike M., North Carolina

Shop the look

The door in this project

4 Lite Interior Steel French Door - Alpada Doors

4 Lite Interior Steel French Door | Modern Line

From $1,736.00

Send your opening for a quote Call +1 (614) 581-2788

Keep looking

More projects

Matte black 6 Lite steel French door with clear glass at the top of a basement stairwell, Pennsylvania

Basement Door in Pennsylvania: 6 Lite Steel French Door

Matte black 6 Lite steel French door with clear glass as an office door, North Carolina

Office Door in North Carolina: 6 Lite Steel French Door

Matte black 3 Lite steel French door with clear glass at the entrance of a wine room, Florida

Wine Room Door in Florida: 3 Lite Steel French Door

All projects

Size Guide - Swing Doors

Available Sizes

Door Type	Min Width	Max Width	Min Height	Max Height
Single Door	24"	54"	78"	108"
Double Door	36"	108"	78"	108"

Any size within this range can be pre-ordered. Doors come pre-hung in a steel frame — listed sizes include the frame.

How to Measure

Width: Measure top, middle, and bottom — use the smallest.
Height: Measure left and right — use the smallest.
Alignment: Use a level to ensure straight edges.

Note: For rough openings, add 0.5" to both width and height for finishing space.

How to measure guide for swing doors

Size Guide - Barn doors

Available Sizes

Door Type	Min Width	Max Width	Min Height	Max Height
Single Door	24"	54"	80"	108"
Double Door	36"	108"	80"	108"

Any size within this range can be pre-ordered. Doors come pre-hung in a steel frame — listed sizes include the frame.

How to Measure

Width: Measure the opening and ensure the wall has enough space on one or both sides for the door(s) to slide open fully.
Height: Measure from the floor to the top of the opening.
Clearance: Allow at least 6" above the opening for the track, and 2–2.5" from the ceiling. Leave 0.4–0.6" beneath the door for the floor guide. We recommend making the door 1.5–2" wider than the opening to ensure full coverage and avoid gaps.

Note: Barn doors do not require a jamb or frame. The track system should be mounted into solid wood blocking or wall studs for best support.

How to measure guide for barn doors

Size Guide - Arched doors

Available Sizes

Door Type	Min Width	Max Width	Min Height	Max Height
Single Door	24"	54"	78"	108"
Double Door	36"	108"	78"	108"

Any size within this range can be pre-ordered. Doors come pre-hung in a steel frame — listed sizes include the frame.

How to Measure

Width: Measure the opening at the top, middle, and bottom. Use the smallest of the three measurements.
Alignment: Use a level to make sure the sides are straight and plumb.
Height: Measure at the center of the arch — or the highest point of the opening if it’s square.

Note: For rough openings, we recommend adding 0.5" to both the width and height to allow for finishing and easy installation.